VoIP Phones - FritzBox: Difference between revisions

Some notes fritzbox 7530, taken (with thanks!) from: https://forums.thinkbroadband.com/voip/t/4749882-re-aa-voip-with-fritzbox-7530.html

== FritzOS 7.57 with A&A VoIP, all works fine. ==

=== Settings as follows:===

Under "Telephony -> Telephone Numbers" you will need an entry for A&A, which should look like:

Status Telephone Number Provider Preselection

(green dot) 01yyyxxxxxx voiceless.aa.net.uk* *123#

I obscured our phone number, under "Status" you should see a green dot if successfully registered, the *123# is put in there by the Fritzbox, no need to set that up yourself.

There is an "edit" and "delete" button to the right. Once you click "edit" you see another page "Edit Telephone Number". Here I have got:

====''under'' Account Information====

* Use internet telephone number '''checked'''

* Telephony provider '''Other provider'''

====Telephone number for registration====

* your number in international format, ''I have +441268xxxxxx''

* Internal telephone number in the FRITZ!Box** ''not really important, I have 01268xxxxx''

* Display name ''(leave blank)''

====''under'' Account Information====

*Username, Authentication name, ''Password as supplied by A&A''

*Registrar '''voiceless.aa.net.uk'''

*Proxy server ''(leave blank)''

*STUN server ''(leave blank)''

====''under'' Telephone Number Format====

* Precede the number dialed with these prefix numerals:

* Country code ''select'' '''With prefix (0044)'''

* Area code ''select'' '''Without prefix (1268)'''

* Relay outgoing emergency calls without prefixes '''checked'''

* Relay special rate numbers without prefixes '''checked'''

the rest in this section is blank/unchecked

====''under'' Additional Settings for the Telephone Number====

*DTMF transmission '''RTP or Inband'''

*Suppress outgoing Caller ID (CLIR) '''CLIR via display name'''

*Caller ID '''disabled'''

*Provider supports G.726 in accordance with RFC 3551 '''unchecked'''

*Provider supports call-back on busy (CCBS) in accordance with RFC 4235 '''unchecked'''

*Provider supports forwarding of calls during the calling phase '''unchecked'''

*Packet size in milliseconds in send direction '''20'''

====''under'' Additional Settings for the Connection====

*Use telephone number for registration '''checked'''

*Always register via an internet connection '''checked'''

=====Contact internet telephony provider via=====

*Transport protocol '''only via IPv4'''

*Media protocol '''RTP/AVP'''

*Provider supports MWI (RFC 3842) '''unchecked'''

*Provider does not support REGISTER-fetch '''unchecked'''

It may also work with some of the above configured differently, but what is shown above works for me.

==FRITZ!Box 7490 / FRITZ!OS:7.59 -- all works fine==

The ''Additional Settings for the Connection'' section seems to have been rearranged slightly, compared with the above.

====''under'' Additional Settings for the Connection====

I have:

* Use telephone number for registration '''checked'''

* Always register via an internet connection '''checked'''

* Contact internet telephony provider via '''only via IPv4'''

* Transport protocol '''Automatic'''

* Media protocol '''RTP/AVP'''

* Provider supports MWI (RFC 3842) '''unchecked'''

* Provider does not support REGISTER-fetch '''unchecked'''

The interesting difference here is that I have the ''encrypted telephony'' option checked, and it still works.

====''under'' Telephone Number Format:====

I have:

* Country code ''select'' '''none'''

* Area code ''select'' '''none'''

because my box is globally configured to match its location in Germany, so offers me only '''With prefix (0049)''' as an option, which is unhelpful. I tend to dial UK numbers prefixed with <tt>0044</tt>, which may be a habit that I developed in order to make sure this setting works for me. -- [[User:Philh|Philh]] ([[User talk:Philh|talk]])