VoIP Phones - Gigaset N300: Difference between revisions

(9 intermediate revisions by 3 users not shown)

Line 26:

= IP address =

By default the base unit picks up an IP address using DHCP.

By ~~default~~ ~~the~~ ~~base~~ ~~unit~~ ~~picks up an IP address using DHCP.~~ ~~This~~ can be over-ridden by connecting to "Settings -> IP Configuration", selecting "Static" and filling in the address details as required. Then click on the "Set" button. By default, the device only allows access to it's web interface from the local subnet.

⚫

(If you need to do so: this can be over-ridden by connecting to "Settings -> IP Configuration", selecting "Static" and filling in the address details as required. Then click on the "Set" button. By default, the device only allows access to it's web interface from the local subnet.)

=N300 and Voiceless=

Line 125:

Line 127:

# Press the display key "Yes" to start the download.

=Full PDF Manual=

⚫

= Quirks =

* [[File:N300-User-Manual.pdf|Manual PDF]]

⚫

= Quirks/Problems =

We have seen odd things with a S685IP (Firmware version: 022270000000 / 043.00) where it would register, but not pass calls. A reboot of the base station fixed this.

(This has also possibly been seen on an N300A IP, and again a reboot seemed to clear it. The symptoms were call state stuck in "183 Session Progress", and the caller neither being connected nor getting a ring tone. Possibly triggered by some earlier testing involving calls from an incoming number that also appeared on the "also ring" list. - [[User:Tc424|Tc424]] ([[User talk:Tc424|talk]]) 21:43, 31 May 2023 (BST))

==Calls always withhold my CLI==

The hand set will have a setting to make calls withheld - under the Services menu.

=Firewall & Security=

*You will also want to set up firewall rules, as per the [[VoIP Firewall]] page.

*Also see the [[VoIP Security]] page for information about securing your VoIP service.

=syslog from the Gigaset N510=

Some syslog options are available, eg, on the N510 you can navigate to syslog.html on the web ui. This isn't linked to from the main UI so is probably an unsupported feature.