Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

DGA0122 Disable SSH: Difference between revisions

← Older edit
Content deleted Content added
Adsb (talk | contribs)
editor
520 edits
Easier way to turn SSH on or off - needs engineer username on Web UI
Adsb (talk | contribs)
editor
520 edits
m Reference OpenWrt
 
Line 3: Line 3:
[[Category:Technicolor_DGA4134]]
[[Category:Technicolor_DGA4134]]


This probably applies to most Technicolor routers.
This probably applies to most Technicolor routers of the same era.


ssh is enabled from the LAN, and can be accessed using the engineer user and the admin password.
ssh is enabled from the LAN, and can be accessed using the engineer user and the admin password.


The CLI is fairly minimal, there is no manual :-( N.B. If you choose to play with the CLI, the '''rtfd''' command will reset the router to factory default setting, without any warning or Y/N prompt.
The CLI is fairly unfriendly, there is no manual. The firmware is based on OpenWrt, and the '''get''' and '''set''' commands work like as in that firmware's UCI. N.B. If you choose to play with the CLI, the '''rtfd''' command will reset the router to factory default setting, without any warning or Y/N prompt.


ssh can be disabled if you want, you can do this via the web interface (at least with firmware 19.4) or via ssh.
ssh can be disabled if you want, you can do this via the web interface (at least with firmware 19.4) or via ssh.
Retrieved from "http://support.aa.net.uk/DGA0122_Disable_SSH"