Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VoIP Phones - Yealink DECT: Difference between revisions

← Older edit
Content deleted Content added
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
Stuarth (talk | contribs)
autoreview, Bureaucrats, editor, reviewer, Administrators
16 edits
mNo edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 81: Line 81:


# Select 'Account' & 'Register' tab & enter you VoIP number (+44...) in 'Register Name' & 'Username'.
# Select 'Account' & 'Register' tab & enter you VoIP number (+44...) in 'Register Name' & 'Username'.
# Enter SIP from your control page into 'Password' box.
# Enter SIP password from your control page into 'Password' box.
# Set 'Server Host' to 'voiceless.aa.net.uk'.
# Set 'Server Host' to 'voiceless.aa.net.uk'.
# Click 'Confirm'.
# Click 'Confirm'.
Line 139: Line 139:


<gallery mode="packed" widths=250px heights=250px mode="nolines" caption="Screenshots of number assignment page">
<gallery mode="packed" widths=250px heights=250px mode="nolines" caption="Screenshots of number assignment page">
Yealink W53P Hanset Assignment.png|Number Assignment
Yealink W53P Handset Assignment.png|Number Assignment
Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account
Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account
</gallery>
</gallery>
Line 190: Line 190:
OK --> Call Features (orange) --> Do Not Disturb
OK --> Call Features (orange) --> Do Not Disturb



⚫
==Factory reset the Yealink DECT Base Station==

⚫
=Registering an additional Handset=
⚫
# Power up handset
⚫
# Press the button under 'Reg'
⚫
# Hold the button on the Base for 3 seconds
⚫
# Handset should then initialise
⚫
# Go to the Base station UI and set up the new account:
⚫
# Account - Number Assignment - or set up a new account:
⚫
## Account - Set Account2 --> Fill in details
⚫
## Account - Handset name --> Set the name


⚫
=Factory reset the Yealink DECT Base Station=
If you have lost the password you will have to factory reset the base station, and the default username and password will then work, and you'll need to configure the unit again.

There are a few ways to factory reset the Yealink base station:
There are a few ways to factory reset the Yealink base station:


===From web ui===
===From web ui===
If you know the password!
Settings -> Upgrade --> Reset
Settings -> Upgrade --> Reset


Line 208: Line 224:
# Wait a further 5 minutes
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
# Then, reboot the base station by unplugging it from power and plugging it back in

⚫
=Registering an additional Handset=
⚫
# Power up handset
⚫
# Press the button under 'Reg'
⚫
# Hold the button on the Base for 3 seconds
⚫
# Handset should then initialise
⚫
# Go to the Base station UI and set up the new account:
⚫
# Account - Number Assignment - or set up a new account:
⚫
## Account - Set Account2 --> Fill in details
⚫
## Account - Handset name --> Set the name




Line 225: Line 231:




[[Category:VoIP Phones|Gigaset N300]]
[[Category:VoIP Phones|Yealink DECT]]
Retrieved from "http://support.aa.net.uk/VoIP_Phones_-_Yealink_DECT"