Latest revision as of 11:57, 9 July 2025

Obtaining the IP address via your handset

You'll need to know the IP address of the Linksys In order to access It's web UI, where you can make changes:

On your handset, enter "****", enter "110", then press "#" , the IP address should then be recited.

Please set a SIP password first. Click VoIP_Password for help.

Initial Configuration:

You may have problems with one-way audio or struggles to receive incoming calls.

You can set a STUN server If you head to SIP - then under "NAT support parameters".

@@ Line 1: / Line 1: @@
 =Obtaining the IP address via your handset=
-You'll need to know the IP address of the Linksys In order to access It's web UI, allowing you to make changes.
+You'll need to know the IP address of the Linksys In order to access It's web UI, where you can make changes:
-On your handset, enter "****", enter "110", then press "#"
+*On your handset, enter "****", enter "110", then press "#" , the IP address should then be recited.
-The IP address should then be recited.
+*Open a web browser and enter this IP address into your address bar.
+* Once the page Is open, log In.
 =Setting up a PAP2=
@@ Line 10: / Line 13: @@
 '''Please set a SIP password first'''. Click [[VoIP_Password]] for help.
-Initial Configuration:
+'''Initial Configuration:'''
 [[File:Linksys PAP2 config .png|600px]]
 =NAT Features=
+You may have problems with one-way audio or struggles to receive incoming calls.
 You can set a STUN server If you head to SIP - then under "NAT support parameters".
-STUN Enable: "yes"
+*STUN Enable: "yes"
-STUN Server: stun.aa.net.uk
+*STUN Server: stun.aa.net.uk