Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Ethernet Port Settings: Difference between revisions

← Older edit
Content deleted Content added
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,652 edits
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,652 edits
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<indicator name="Front">[[File:Menu-ethernet.svg|link=:Category:Ethernet|30px|Back up to the Ethernet Services Page]]</indicator>
<indicator name="Front">[[File:Menu-ethernet.svg|link=:Category:Ethernet|30px|Back up to the Ethernet Services Page]]</indicator>
This information is in relation to our Etherway/Etherflow and EAD services.
This information is in relation to our Etherway/Etherflow and EAD services, their physical port settings and VLAN information.




Line 13: Line 13:
===SFP Requirements for customer router===
===SFP Requirements for customer router===
*For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors.
*For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors.
*A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port.
*Your router/switch would also need a SFP port.
*A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end.
*We can supply a suitable SFP and cable if you require.
*We can supply a suitable SFP and cable if you require.


Retrieved from "http://support.aa.net.uk/Ethernet_Port_Settings"