FreeBSD IPv6 Tunnel Config: Difference between revisions

Latest revision as of 13:09, 24 February 2015

In /etc/rc.conf:

ipv6_enable="YES"
ipv6_gateway_enable="YES"
ipv6_defaultrouter="-interface gif0"
ipv6_default_interface="gif0"
gif_interfaces="gif0"
gifconfig_gif0="A.B.C.D 81.187.81.6"
# substitute the IPv4 address of your machine for A.B.C.D
ipv6_ifconfig_gif0="2001:08b0:XXXX:1::1 prefixlen 64"
# 2001:08b0:XXXX should be replaced by your /48 allocation
# in this case I have used IP 1 on subnet 1 as the IPv6
# address - you can (and probably should) adjust as desired.

Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).

Revision as of 11:59, 25 November 2010 (view source) Tdgsandf (talk \| contribs) No edit summary ← Older edit		Latest revision as of 13:09, 24 February 2015 (view source) AA-Andrew (talk \| contribs) mNo edit summary
Line 16:		Line 16:
	Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).		Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).

	[[Category:IPv6]] [[Category:~~FreeBSD]]~~ ~~[[Category:Configuring~~]]		[[Category:IPv6]] [[Category:3rd Party Routers]]