VoIP Phones - Cisco SPA: Difference between revisions
m (→Line Settings) |
|||
| (26 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator> |
|||
| ⚫ | |||
=Cisco ATA191-MPP= |
|||
| ⚫ | |||
=== firmware 11.2.4 regression for IPv6 only configurations) === |
|||
* See: [https://community.cisco.com/t5/voice-systems-and-accessories-small-business/ata191-mpp-firmware-11-2-4-regression-outgoing-calls-ipv6-only/m-p/4933684#M65933 Cisco Page on IPv6 and v11.2.4 problems] |
|||
=Cisco SPA120 & SPA122 = |
|||
[[File:SPA112.jpg|right]] |
|||
*This is similar to the older Linksys PAP2T ATA |
|||
| ⚫ | |||
*[https://www.revk.uk/2013/08/nostalgia-is-not-what-it-used-to-be.html Blog post regarding this] |
|||
*Does seem to work will with the modems on Sky boxes to talk home on. |
|||
---- |
|||
The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on. |
|||
In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc. |
|||
'''PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.''' |
|||
'''Do not use +44 as part of the username, otherwise the device will not register. You must use 0.''' |
|||
| ⚫ | |||
View of the 'quick settings' |
View of the 'quick settings' |
||
[[File:CiscoSPA-1- |
[[File:CiscoSPA-1-Line2.png|border|400px]] |
||
==Line Settings== |
==Line Settings== |
||
[[File:CiscoSPA-2-Line1.png|border| |
[[File:CiscoSPA-2-Line1.png|border|400px]] |
||
| ⚫ | |||
[[File:CiscoSPA-2- |
[[File:CiscoSPA-2-Line2.png|border|400px]] |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
==SIP Settings== |
==SIP Settings== |
||
*Change RTP Packet Size: to 0.020 (which is 20ms) |
|||
change to 20ms |
|||
| ⚫ | |||
[[File:CiscoSPA-3-SIP2.png|border|400px]] |
|||
==Regional Settings== |
==Regional Settings== |
||
*Change FXS Output gain to -3 if modems have problems |
|||
Change the impedance |
*Change the impedance setting to 370_630|310nF |
||
[[File:CiscoSPA-5-Regional.png|border|400px]] |
|||
==Firewall & Security== |
|||
| ⚫ | |||
*You will also want to set up firewall rules, as per the [[VoIP Firewall]] page. |
|||
*Also see the [[VoIP Security]] page for information about securing your VoIP service. |
|||
[[Category:VoIP Phones|Cisco SPA]] |
|||
=Notes= |
|||
*Has been known to work with SKy boxes to phone home using their modems. |
|||
Latest revision as of 10:24, 4 July 2024
Cisco ATA191-MPP
firmware 11.2.4 regression for IPv6 only configurations)
Cisco SPA120 & SPA122
- This is similar to the older Linksys PAP2T ATA
- Ensure software is updated, as this does help with the quality of the audio, we upgraded to 1.3.2-XU (014) Jul 2 2013
- Blog post regarding this
- Does seem to work will with the modems on Sky boxes to talk home on.
The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on.
In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.
PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.
Do not use +44 as part of the username, otherwise the device will not register. You must use 0.
View of the 'quick settings'
Line Settings
SIP Settings
- Change RTP Packet Size: to 0.020 (which is 20ms)
Regional Settings
- Change FXS Output gain to -3 if modems have problems
- Change the impedance setting to 370_630|310nF
Firewall & Security
- You will also want to set up firewall rules, as per the VoIP Firewall page.
- Also see the VoIP Security page for information about securing your VoIP service.