VoIP Phones - Cisco SPA: Difference between revisions

Back up to the VoIP Configuring page
From AAISP Support Site
mNo edit summary
 
(20 intermediate revisions by 5 users not shown)
Line 1: Line 1:
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>

=Cisco ATA191-MPP=
=== firmware 11.2.4 regression for IPv6 only configurations) ===
* See: [https://community.cisco.com/t5/voice-systems-and-accessories-small-business/ata191-mpp-firmware-11-2-4-regression-outgoing-calls-ipv6-only/m-p/4933684#M65933 Cisco Page on IPv6 and v11.2.4 problems]

=Cisco SPA120 & SPA122 =
=Cisco SPA120 & SPA122 =


Line 4: Line 10:
*This is similar to the older Linksys PAP2T ATA
*This is similar to the older Linksys PAP2T ATA
*Ensure software is updated, as this does help with the quality of the audio, we upgraded to 1.3.2-XU (014) Jul 2 2013
*Ensure software is updated, as this does help with the quality of the audio, we upgraded to 1.3.2-XU (014) Jul 2 2013
*[https://www.revk.uk/2013/08/nostalgia-is-not-what-it-used-to-be.html Blog post regarding this]
*Does seem to work will with the modems on Sky boxes to talk home on.

----


The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on.
The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on.


In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.
[[File:CiscoSPA-0-Status.png|300px|border]]

'''PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.'''

'''Do not use +44 as part of the username, otherwise the device will not register. You must use 0.'''


[[File:CiscoSPA-0-Status.png|400px|border]]


View of the 'quick settings'
View of the 'quick settings'


[[File:CiscoSPA-1-Line.png|border|300px]]
[[File:CiscoSPA-1-Line2.png|border|400px]]


==Line Settings==
==Line Settings==
[[File:CiscoSPA-2-Line1.png|border|300px]]
[[File:CiscoSPA-2-Line1.png|border|400px]]


[[File:CiscoSPA-2-Line2.png|border|300px]]
[[File:CiscoSPA-2-Line2.png|border|400px]]


[[File:CiscoSPA-2-Line3.png|border|300px]]
[[File:CiscoSPA-2-Line3.png|border|400px]]


[[File:CiscoSPA-2-Line4.png|border|300px]]
[[File:CiscoSPA-2-Line4.png|border|400px]]


==SIP Settings==
==SIP Settings==
Change RTP Packet Size: to 0.020 (which is 20ms)
*Change RTP Packet Size: to 0.020 (which is 20ms)


[[File:CiscoSPA-3-SIP1.png|border|300px]]
[[File:CiscoSPA-3-SIP1.png|border|400px]]


[[File:CiscoSPA-3-SIP2.png|border|300px]]
[[File:CiscoSPA-3-SIP2.png|border|400px]]


==Regional Settings==
==Regional Settings==
*Change FXS Output gain to -3 if modems have problems
Change the impedance settings:
*Change the impedance setting to 370_630|310nF

[[File:CiscoSPA-5-Regional.png|border|400px]]



==Firewall & Security==
[[File:CiscoSPA-5-Regional.png|border|300px]]
*You will also want to set up firewall rules, as per the [[VoIP Firewall]] page.
*Also see the [[VoIP Security]] page for information about securing your VoIP service.


[[Category:VoIP Phones|Cisco SPA]]
=Notes=
*Has been known to work with SKy boxes to phone home using their modems.

Latest revision as of 10:24, 4 July 2024


Cisco ATA191-MPP

firmware 11.2.4 regression for IPv6 only configurations)

Cisco SPA120 & SPA122

SPA112.jpg
  • This is similar to the older Linksys PAP2T ATA
  • Ensure software is updated, as this does help with the quality of the audio, we upgraded to 1.3.2-XU (014) Jul 2 2013
  • Blog post regarding this
  • Does seem to work will with the modems on Sky boxes to talk home on.

The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on.

In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.

PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.

Do not use +44 as part of the username, otherwise the device will not register. You must use 0.


CiscoSPA-0-Status.png

View of the 'quick settings'

CiscoSPA-1-Line2.png

Line Settings

CiscoSPA-2-Line1.png

CiscoSPA-2-Line2.png

CiscoSPA-2-Line3.png

CiscoSPA-2-Line4.png

SIP Settings

  • Change RTP Packet Size: to 0.020 (which is 20ms)

CiscoSPA-3-SIP1.png

CiscoSPA-3-SIP2.png

Regional Settings

  • Change FXS Output gain to -3 if modems have problems
  • Change the impedance setting to 370_630|310nF

CiscoSPA-5-Regional.png


Firewall & Security

  • You will also want to set up firewall rules, as per the VoIP Firewall page.
  • Also see the VoIP Security page for information about securing your VoIP service.