Mobile IPv6: Difference between revisions
(add ipv6 category tag) |
mNo edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
This page is about native IPv6 support on mobile devices. |
|||
At the moment (June 2013) AAISPs data SIM service does not support IPv6 natively due to the carrier not supporting it, but tunnelled IPv6 is possible, and means that IPv6 can be used and IPv6 on a DSL line can even fall over to be tunnelled to 3G in the event of a DSL fault. |
|||
== Device support == |
== Device support == |
||
| Line 5: | Line 9: | ||
Devices which do/don't support an IPv6 PDP type (there are [http://en.wikipedia.org/wiki/Hayes_command_set AT] commands to query the modem's capabilities): |
Devices which do/don't support an IPv6 PDP type (there are [http://en.wikipedia.org/wiki/Hayes_command_set AT] commands to query the modem's capabilities): |
||
[[Category:Mobile]][[Category:IPv6]] |
|||
=== Nokia E51 (IPv4/IPv6) === |
=== Nokia E51 (IPv4/IPv6) === |
||
| Line 81: | Line 85: | ||
I see the same results with a Vodafone contract data SIM. |
I see the same results with a Vodafone contract data SIM. |
||
[[Category:Data SIMs]] |
|||
Latest revision as of 13:12, 6 March 2015
This page is about native IPv6 support on mobile devices.
At the moment (June 2013) AAISPs data SIM service does not support IPv6 natively due to the carrier not supporting it, but tunnelled IPv6 is possible, and means that IPv6 can be used and IPv6 on a DSL line can even fall over to be tunnelled to 3G in the event of a DSL fault.
Device support
As the modem establishes an IP(v4) PDP context with the network, to do IPv6 the modem would need to support it (or use a full PPP context).
Devices which do/don't support an IPv6 PDP type (there are AT commands to query the modem's capabilities):
Nokia E51 (IPv4/IPv6)
ATI Nokia AT+GCAP +GCAP: +CGSM,+DS,+W AT+CGDCONT=? +CGDCONT: (1-2),"IP",,,(0),(0) +CGDCONT: (1-2),"IPV6",,,(0),(0)
Huawei E220 (IPv4/PPP, IPv4/IPv6/PPP)
ATI Manufacturer: huawei Model: E220 Revision: 11.110.01.03.00 +GCAP: +CGSM,+FCLASS,+DS AT+CGDCONT=? +CGDCONT: (1-16),"IP",,,(0-1),(0-1) +CGDCONT: (1-16),"PPP",,,(0-1),(0-1)
ATI Manufacturer: huawei Model: E220 Revision: 11.117.10.02.00 +GCAP: +CGSM,+FCLASS,+DS AT+CGDCONT=? +CGDCONT: (1-16),"IP",,,(0-2),(0-4) +CGDCONT: (1-16),"PPP",,,(0-2),(0-4) +CGDCONT: (1-16),"IPV6",,,(0-2),(0-4)
Vodafone (Huawei) K4505 (IPv4/PPP)
ATI Manufacturer: Vodafone (Huawei) Model: K4505 Revision: 11.828.03.00.11 +GCAP: +CGSM,+DS,+ES AT+CGDCONT=? +CGDCONT: (1-16),"IP",,,(0-2),(0-3) +CGDCONT: (1-16),"PPP",,,(0-2),(0-3)
ZTE MF112 (IPv4/IPv6/PPP)
ATI Manufacturer: ZTE CORPORATION Model: MF112 Revision: BD_P671A2V1.0.2B05 +GCAP: +CGSM,+DS,+ES AT+CGDCONT=? +CGDCONT: (1-16),"IP",,,(0-2),(0-3) +CGDCONT: (1-16),"PPP",,,(0-2),(0-3) +CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)
ZTE MF627 (IPv4/IPv6/PPP)
ATI Manufacturer: ZTE INCORPORATED Model: MF626 Revision: BD_P673M3V1.0.1B02 +GCAP: +CGSM,+DS,+ES AT+CGDCONT=? +CGDCONT: (1-16),"IP",,,(0-2),(0-3) +CGDCONT: (1-16),"PPP",,,(0-2),(0-3) +CGDCONT: (1-16),"IPV6",,,(0-2),(0-3)
Network support
I (met) have tried connecting with a K4505 and an A&A L2TP-handover SIM using a PPP context, but it doesn't work. An IP context gives you a CONNECT response immediately, with a PPP context it sits there for a couple of seconds before returning NO CARRIER.
I see the same results with a Vodafone contract data SIM.