Router - Vigor 130: Difference between revisions
mNo edit summary |
(→top: clean up) |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
The Vigor 130 is an |
The Vigor 130 is an VDSL and ADSL modem. It can be used on an FTTC line when you have your own PPPoE router that doesn't have a built in modem. |
||
*Product page: http://www.draytek.co.uk/products/business/vigor-130 |
|||
[[File:Vigor_130.jpg|none|frame|Vigor 130 modem]] |
|||
==Baby Jumbo Frames== |
|||
The Vigor 130 works with baby jumbo frames and a router that supports RFC 4638 out of the box, this will give you 1500 MTU. This is as of firmware version 3.7.8.1 (released on the 17th of June 2015). |
|||
==Firmware Upgrading== |
|||
If you need to upgrade firmware, you can download updates from http://www.draytek.co.uk/support/downloads. The zip file (in my case named v130_3781_UK.zip) contains a readme with a changelog and two |
|||
binaries. If you wish to keep your configuration load the ".all" file, and if you wish to factory reset load the ".rst" file. As it should work out in factory default config, it is worth resetting the modem |
|||
anyway if you're upgrading the firmware. |
|||
[[Category:3rd Party Routers|Vigor 130]] |
[[Category:3rd Party Routers|Vigor 130]] |
||
Latest revision as of 00:19, 18 August 2018
The Vigor 130 is an VDSL and ADSL modem. It can be used on an FTTC line when you have your own PPPoE router that doesn't have a built in modem.
- Product page: http://www.draytek.co.uk/products/business/vigor-130
Baby Jumbo Frames
The Vigor 130 works with baby jumbo frames and a router that supports RFC 4638 out of the box, this will give you 1500 MTU. This is as of firmware version 3.7.8.1 (released on the 17th of June 2015).
Firmware Upgrading
If you need to upgrade firmware, you can download updates from http://www.draytek.co.uk/support/downloads. The zip file (in my case named v130_3781_UK.zip) contains a readme with a changelog and two binaries. If you wish to keep your configuration load the ".all" file, and if you wish to factory reset load the ".rst" file. As it should work out in factory default config, it is worth resetting the modem anyway if you're upgrading the firmware.