ZyXEL GS1900-8: Difference between revisions
(Created page with "==Factory Default Admin Username/Password== Note: If AAISP configured the switch then the credentials will be different {|class="wikitable" !colspan="3"|Default/Factory Passwo...") |
|||
| Line 1: | Line 1: | ||
=Overview= |
|||
The GS1900-8 is a fanless 8 port managed switch. |
|||
=Configuration= |
|||
==Factory Default Admin Username/Password== |
==Factory Default Admin Username/Password== |
||
Note: If AAISP configured the switch then the credentials will be different |
Note: If AAISP configured the switch then the credentials will be different |
||
| Line 13: | Line 18: | ||
|1234 |
|1234 |
||
|} |
|} |
||
https is enable by default, albeit with a certificate that will give browser warnings |
|||
==VLAN config== |
|||
When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions. |
|||
We'll configure the switch as: |
|||
*Port 1 - VLAN 101, for ADSL line 1 |
|||
*Port 2 - VLAN 102, for ADSL line 2 |
|||
*Port 3 - VLAN 103, for ADSL line 3 |
|||
*Port 4 - VLAN 104, for ADSL line 4 |
|||
*Port 8 is for the FireBrick |
|||
===Accessing the switch==== |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 101, then Click Next |
|||
***Drag Port01 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so: |
|||
**From the front page, Click VLAN |
|||
**Create a new VLAN, enter in 102, then Click Next |
|||
***Drag Port02 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 103, then Click Next |
|||
***Drag Port03 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 104, then Click Next |
|||
***Drag Port04 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
Optionally, if you wish, you can name the switch: |
|||
*From the front page, click the settings/Cog icon on the left |
|||
**Click System, then Information |
|||
**Enter in Name, Location, Contact details as you wish |
|||
**Click Apply |
|||
Optionally, If you wish, you can set Names for your VLANs: |
|||
*From the front page, click the settings/Cog icon on the left |
|||
*Click VLAN, then VLAN |
|||
**Click the modify icon to the right of VLAN 101 |
|||
**Change the name from VLAN0101 to, say, PPP101 |
|||
**Click Apply |
|||
*Repeat for the other VLANs |
|||
Optionally, if you wish, you can name the Ethernet ports |
|||
*From the front page, click the settings/Cog icon on the left |
|||
*Click Port, then Port |
|||
**Tick the bot next to Port 1, Click Edit |
|||
**Set the name to, say, Modem1 |
|||
*Reat the above for ports 2, 3, and 4. For port 8, name that FireBrick. |
|||
Revision as of 09:39, 30 Ocak 2017
Overview
The GS1900-8 is a fanless 8 port managed switch.
Configuration
Factory Default Admin Username/Password
Note: If AAISP configured the switch then the credentials will be different
| Default/Factory Password | ||
|---|---|---|
| IP: | 192.168.1.1 | |
| Username: | admin | |
| Password: | 1234 | |
https is enable by default, albeit with a certificate that will give browser warnings
VLAN config
When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions.
We'll configure the switch as:
- Port 1 - VLAN 101, for ADSL line 1
- Port 2 - VLAN 102, for ADSL line 2
- Port 3 - VLAN 103, for ADSL line 3
- Port 4 - VLAN 104, for ADSL line 4
- Port 8 is for the FireBrick
Accessing the switch=
- Click VLAN
- Create a new VLAN, enter in 101, then Click Next
- Drag Port01 to the Untagged area
- Drag Port08 to the tagged area
- Click Next, then click Finish
- Create a new VLAN, enter in 101, then Click Next
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:
- From the front page, Click VLAN
- Create a new VLAN, enter in 102, then Click Next
- Drag Port02 to the Untagged area
- Drag Port08 to the tagged area
- Click Next, then click Finish
- Click VLAN
- Create a new VLAN, enter in 103, then Click Next
- Drag Port03 to the Untagged area
- Drag Port08 to the tagged area
- Click Next, then click Finish
- Create a new VLAN, enter in 103, then Click Next
- Click VLAN
- Create a new VLAN, enter in 104, then Click Next
- Drag Port04 to the Untagged area
- Drag Port08 to the tagged area
- Click Next, then click Finish
- Create a new VLAN, enter in 104, then Click Next
Optionally, if you wish, you can name the switch:
- From the front page, click the settings/Cog icon on the left
- Click System, then Information
- Enter in Name, Location, Contact details as you wish
- Click Apply
Optionally, If you wish, you can set Names for your VLANs:
- From the front page, click the settings/Cog icon on the left
- Click VLAN, then VLAN
- Click the modify icon to the right of VLAN 101
- Change the name from VLAN0101 to, say, PPP101
- Click Apply
- Repeat for the other VLANs
Optionally, if you wish, you can name the Ethernet ports
- From the front page, click the settings/Cog icon on the left
- Click Port, then Port
- Tick the bot next to Port 1, Click Edit
- Set the name to, say, Modem1
- Reat the above for ports 2, 3, and 4. For port 8, name that FireBrick.