FireBrick 2700 with 4G ZTE MF823: Difference between revisions
Content deleted Content added
| Line 9: | Line 9: | ||
The ZTE823 works as an Ethernet device by default, it is possible to change the mode so that it works as a modem. The idea here is that rather than the dongle NATing the connection it can be a modem and the FireBrick will be given the public WAN IP address directly. |
The ZTE823 works as an Ethernet device by default, it is possible to change the mode so that it works as a modem. The idea here is that rather than the dongle NATing the connection it can be a modem and the FireBrick will be given the public WAN IP address directly. |
||
==Switching to Modem Mode== |
|||
==Mode switching== |
|||
[[File:ZTEMF823-mode.png| |
[[File:ZTEMF823-mode.png|400px|Dial Settings]] |
||
#Disable auto-connect |
#Disable auto-connect |
||
| Line 23: | Line 23: | ||
#*In your browser, go to: http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY |
#*In your browser, go to: http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY |
||
==Switching to Ethernet mode== |
|||
To put the dongle back to Ethernet mode you will need to connect the dongle to a computer in order to send it some commands via a serial terminal |
|||
#Open gtkserial or another serial terminal (or simply echo the following AT commands to /dev/ttyUSB2): |
|||
ATZ |
|||
AT&F |
|||
AT+ZCDRUN=9 |
|||
AT+ZCDRUN=F |
|||
Disconnect the modem from the computer and reconnect it to the FireBrick |
|||
[[Category:FireBrick]] |
[[Category:FireBrick]] |
||
[[Category:Data SIMs]] |
[[Category:Data SIMs]] |
||