Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick 2700 Configuration run-through: Difference between revisions

← Older editNewer edit →
Content deleted Content added
Reedy (talk | contribs)
editor
706 edits
Remove config for ntp, just use defaults
Reedy (talk | contribs)
editor
706 edits
→Native IPv6: Proper subheader, use better syntax
Line 324: Line 324:
</syntaxhighlight>
</syntaxhighlight>


'''DNS auto-config''':
==DNS auto-config==


( since release V0.02.039 )
(since release V0.02.039)


Setting 'ra=true' will enable auto-configuration of [[IPv6]] addresses, and of the Default Route.
Setting <tt>ra=true</tt> will enable auto-configuration of [[IPv6]] addresses, and of the Default Route.
You may also wish to configure [[IPv6]] DNS servers ( DNS servers that are to be queried over [[IPv6]] ).
You may also wish to configure [[IPv6]] DNS servers (DNS servers that are to be queried over [[IPv6]]).


There are a couple of different mechanisms available to push out [[IPv6]] DNS servers, and the FB2700 supports both.
There are a couple of different mechanisms available to push out [[IPv6]] DNS servers, and the FB2700 supports both.
Retrieved from "http://support.aa.net.uk/FireBrick_2700_Configuration_run-through"