Openreach FTTP ONT: Difference between revisions

Back up to the Routers Category
From AAISP Support Site
Line 20: Line 20:
| Off || no power || Check mains power
| Off || no power || Check mains power
|-
|-
|rowspan="3"| '''PON''' || green || Connected and should be working || Good
|rowspan="3"| '''PON & LOS''' || PON green, LOS Off || Connected and should be working || Good
|-
|-
| flashing green and LOS off || ONT is starting up || Wait a bit for steady green and all should be well...
| PON flashing green, LOS off || ONT is starting up || Wait a bit for steady green and all should be well...
|-
|-
| off and LOS red || Possible fault with the fibre || Check fibre not damaged, reconnect fibre, power cycle ONT|
| PON off, LOS red || Possible fault with the fibre || Check fibre not damaged, reconnect fibre, power cycle ONT|
|-
|-
|rowspan="2"| '''PORT1''' || off || ONT has not ethernet link to the router || Check router
|rowspan="2"| '''PORT1''' || off || ONT has not ethernet link to the router || Check router

Revision as of 22:48, 10 November 2021


Openreach ONT

This page is about the FTTP termination device that Openreach install for FTTP customers.

The Openreach ONT is actually inside an enclosure which also contains a Battery Backup Unit (BBU) and various wiring.

The ONT requires power, so will need a mains power socket nearby.

LED Status

Openreach ONT LED Status
LED Colour Meaning Notes
Power Green has power Good
Off no power Check mains power
PON & LOS PON green, LOS Off Connected and should be working Good
PON flashing green, LOS off ONT is starting up Wait a bit for steady green and all should be well...
PON off, LOS red Possible fault with the fibre
PORT1 off ONT has not ethernet link to the router Check router
blinking/flashing data being transmitted Good
Tel We don't use the Tel ports
Status/Fault/Charging Related to the battery backup

LOS = Loss of service. PON = Passive Optical Network