Revision as of 01:00, 12 November 2024 (view source) TomJepp (talk \| contribs) mNo edit summary ← Older edit		Revision as of 09:05, 12 November 2024 (view source) TomJepp (talk \| contribs) No edit summary Newer edit →
Mikrotik RouterOS routers are ideal & affordable clients for the A&A L2TP service. This guide will walk you through taking a freshly factory reset RouterOS device & configuring it to connect over your existing internet connection. This is a simple starter config that you can use to connect straight away, or to build from if you need something more complex. It will walk you through configuring: * WAN & LAN network interfaces * the L2TP tunnel * DHCP & DNS * firewalling This guide was written by the A&A community & was tested using RouterOS 7.16.1 on a [https://mikrotik.com/product/hap_ax2 hAP ax2]. It should also work well with other affordable Mikrotik routers - such as the [https://mikrotik.com/product/hap_ac2 hAP ac2], the [https://mikrotik.com/product/RB750Gr3 hEX], or the [https://mikrotik.com/product/hex_2024 hEX Refresh]. Very low end routers such as the [https://mikrotik.com/product/RB941-2nD hAP Lite] may work, but are not recommended.

User:TomJepp/RouterOS L2TP (view source)