Router - TG582N - 3G: Difference between revisions
Appearance
Content deleted Content added
Add section on enabling 3G fallback |
|||
| Line 21: | Line 21: | ||
(feel free to copy here if you want) |
(feel free to copy here if you want) |
||
=== Enabling 3G fallback === |
|||
The most common usage of 3G with the [[TG582N|TG582n]] will probably be to use 3G as a fallback link in the event of the ADSL link going down. There are several ways of achieving this, depending on the degree of automation required and the network/tariff used for 3G. The following notes are intended to provide guidance, but are unlikely to result in resiliance on a par with the Office::1 product. |
|||
To configure the 3G link to be permanently up, but traffic only routed when the ADSL link is down, follow the instructions above but then do: |
|||
{Administrator}=>ppp rtdelete intf=mobilebroadband |
|||
{Administrator}=>ppp rtadd intf=mobilebroadband dst=0.0.0.0 metric=20 |
|||
{Administrator}=>ppp ifconfig intf=mobilebroadband dnsmetric=20 |
|||
(This assumes that the routing metric and dns metric for the ADSL link are both set to 10. Larger numbers represent a higher "cost", so interfaces with lower costs will be preferred). |
|||
==Other pages regarding this router:== |
==Other pages regarding this router:== |
||
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl> |
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router [[TG582N]]</ncl> |
||