Router - Comtrend: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
=How to setup Comtrend:= |
=How to setup Comtrend:= |
||
#Plug in router. |
|||
#Go to 192.168.1.1 |
|||
<pre> Username: root |
|||
Password: 12345 |
Password: 12345 |
||
</pre> |
|||
==For BT:== |
==For BT:== |
||
#Advanced -> Layer2 -> ATM -> Add |
|||
<pre> VPI/VCI : 0/38 |
<pre> VPI/VCI : 0/38 |
||
Path0 |
Path0 |
||
Revision as of 14:35, 24 February 2011
How to setup Comtrend:
- Plug in router.
- Go to 192.168.1.1
Username: root Password: 12345
For BT:
- Advanced -> Layer2 -> ATM -> Add
VPI/VCI : 0/38
Path0
EoA
Default Mode
Encapsulation : LLC
Service Category : UBR Without PCR
Strict Priority
4) Advanced -> WAN -> Add a) Select Layer2 interface Next b) PPPoE Description : BT Tick Enable IPv6 Next c) enter username, eg x@a.1 enter password leave service name blank enable Firewall Enable NAT if no public IPv4 (or preferably get public IPv4) next d) Obtain DNS from WAN next e) Save
5) Reboot router
6) Setup LAN and Wireless how you would like.
For BE:
3) Advanced -> Layer2 -> ATM -> Add a) VPI/VCI : 0/101 Path0 EoA Default Mode Encapsulation : LLC
Service Category : UBR Without PCR
Strict Priority
4) Advanced -> WAN -> Add a) Select Layer2 interface Next b) PPPoE Description : BE Tick Enable IPv6 Next c) enter username, eg x@a.1 enter password leave service name blank enable Firewall Enable NAT if no public IPv4 (or preferably get public IPv4) next d) Obtain DNS from WAN next e) Save
5) Reboot router
6) Setup LAN and Wireless how you would like.