VMG1312-B10A: Static Routes: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 7: | Line 7: | ||
Here is an example: |
Here is an example: |
||
[[File:VMG-static.png|frame|none| |
[[File:VMG-static.png|frame|none|Creating a Static Route]] |
||
[[File:ZyXEL-staticroute.png|frame|none|The new Static route, as shown on the routes page]] |
|||
==CLI== |
==CLI== |
||
Revision as of 09:05, 16 Haziran 2015
Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.
The static route can be added via the web interface:
Network Setting -> Routing -> Add new static route
Here is an example:
Creating a Static Route
The new Static route, as shown on the routes page
CLI
From the CLI (telnet/SSH) you can view the route table with:
show list
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.