Revision as of 12:32, 7 September 2011

Billion BiPAC 7800N

Factory IP: 192.168.1.254 Factory User/Pass: admin/admin

Firmware

Lates Firmware is from Billion

Another useful Billion page on spaldwick.com

Comtrend

Info here: *Comtrend

Thomson

We've tested a TG789vn router (Aug 2011) which had beta IPv6 firmware (10.1.0.3), and this works. A bit more info here: [1]

Apple Airport Extreme

The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the knowledge base). You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work.

Revision as of 12:28, 7 September 2011 (view source) Admin (talk \| contribs) No edit summary ← Older edit		Revision as of 12:32, 7 September 2011 (view source) Admin (talk \| contribs) No edit summary Newer edit →
Line 20:		Line 20:
	=Apple Airport Extreme=		=Apple Airport Extreme=

	The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the [http://aa.net.uk/kb-broadband-ipv6-tech.html knowledge base]. You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work.		The Airport Extreme claims to support native IPv6 over PPPoE but we don't know of anyone who has it working. It still works via tunnels though (tunnel configuration explained on the [http://aa.net.uk/kb-broadband-ipv6-tech.html knowledge base]). You need to set the remote tunnel endpoint address to 81.187.81.6, and you need two /64 subnets off us. Assign an IP from one /64 as the WAN address and set the default route to our ping address "bottomless", which is 2001:8b0:0:81::51bb:51bb. Set the LAN address to the first usable IP on the second /64 and it should just work.