FireBrick Road Warrior iPhone iPad iOS8: Difference between revisions
Content deleted Content added
| Line 6: | Line 6: | ||
http://www.firebrick.co.uk/tools/make-profile |
http://www.firebrick.co.uk/tools/make-profile |
||
== iPhone |
== iPhone Profile == |
||
Each iPhone needs a profile file specific to that user. Once created you can email this, or make a web link to it, and the iPhone will recognise it and allow it to be installed. Let's call it <tt>fred.mobileconfig</tt> for our user called ''fred'' as in the above example config. |
Each iPhone needs a profile file specific to that user. Once created you can email this, or make a web link to it, and the iPhone will recognise it and allow it to be installed. Let's call it <tt>fred.mobileconfig</tt> for our user called ''fred'' as in the above example config. |
||
| Line 13: | Line 13: | ||
Note that the SERVERID must match the FQDN entry used when making the server certificate, and hence the local-ID in the config for the connection. |
Note that the SERVERID must match the FQDN entry used when making the server certificate, and hence the local-ID in the config for the connection. |
||
#Once the .mobileconfig file has been generated: |
|||
#Email the file to the iDevice. |
|||
#The file should open in the 'Install Profile' app |
|||
#Tap Install |
|||
#Tap You'll be asked to review and then enter your pin (if you have one for the device) |
|||
#Tap Install, and then Install again (yes the Third tap!) |
|||
#Enter your password for the IPsec account (this is the one as set up in the EAP Identity on the FireBrick (in this example, we had set up a user of fred with a password) |
|||
#Tap next |
|||
#Tap Done |
|||
==Connect== |
|||
#Go to: Settings - VPN - Tap the On/off slider thing |
|||
[[File:Ipsec-iphione.png|none|frame|VPN up on an iPhone]] |
[[File:Ipsec-iphione.png|none|frame|VPN up on an iPhone]] |
||