Revision as of 10:13, 7 August 2015

CLI Tips

The ZyXEL VMG1312 has a web interface and a CLI (Command line interface). Usually the CLI is not needed to be used as all the config changes can be done from the Web interface. However, here are some useful commands for the CLI.

Show the list of commands: (note, there are extra (hidden?) commands that are not listed, eg top and ps!)

Show running processes and CPU/memory information:

top

or

ps

Change LAN address to be 192.168.100.1:

lan config --ipaddr primary 192.168.100.1 255.255.255.0

Note: Check your DHCP settings when changing the LAN address, the DHCP range may well change itself when you change the LAN address this way anyway.

@@ Line 14: / Line 14: @@
 ==== Change LAN address to be 192.168.100.1: ====
  lan config --ipaddr primary 192.168.100.1 255.255.255.0
+Note: Check your DHCP settings when changing the LAN address, the DHCP range may well change itself when you change the LAN address this way anyway.
 [[Category:ZyXEL_VMG1312]]