FireBrick Road Warrior Windows 10: Difference between revisions

Content deleted Content added

Inline

@@ Line 4: / Line 4: @@
 The following instructions were tested on a Windows 10 system.  Setup on other versions of Windows will be similar, but the
 dialogs and messages seen may not be exactly as shown here.
+===Download the Certificate===
 The CA certificate needs to be installed on the Windows machine using an account with administrator privileges.
-First, download the CA certificate in DER format to the Windows machine.  The easiest way to do this is to
+First, download the CA certificate in DER format to the Windows machine.  The easiest way to do this is to@
-use a browser to visit your FireBrick certificate management page, and click on the Download DER link corresponding
+#Use a browser (ed 'Edge') to visit your FireBrick
+##Go to: Config - Certificates to reach the certificate management page
-to the CA certificate.  Save it in a suitable location on the Windows machine.  Note that you must download the certificate in DER format - windows machines do not
+##Click on the Download DER link corresponding to the CA certificate.
-recognize PEM format.  The file will be given the <tt>.crt</tt> extension.
+##Save it in a suitable location on the Windows machine.  Note that you must download the certificate in DER format - windows machines do not recognize PEM format.  The file will be given the <tt>.crt</tt> extension.
+#If using the 'Edge' Browser, then click the Open button once the file as downloaded
 ==Install the certificate==