ZyXEL GS1900-8: Difference between revisions
Content deleted Content added
Created page with "==Factory Default Admin Username/Password== Note: If AAISP configured the switch then the credentials will be different {|class="wikitable" !colspan="3"|Default/Factory Passwo..." |
|||
| Line 1: | Line 1: | ||
=Overview= |
|||
The GS1900-8 is a fanless 8 port managed switch. |
|||
=Configuration= |
|||
==Factory Default Admin Username/Password== |
==Factory Default Admin Username/Password== |
||
Note: If AAISP configured the switch then the credentials will be different |
Note: If AAISP configured the switch then the credentials will be different |
||
| Line 13: | Line 18: | ||
|1234 |
|1234 |
||
|} |
|} |
||
https is enable by default, albeit with a certificate that will give browser warnings |
|||
==VLAN config== |
|||
When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions. |
|||
We'll configure the switch as: |
|||
*Port 1 - VLAN 101, for ADSL line 1 |
|||
*Port 2 - VLAN 102, for ADSL line 2 |
|||
*Port 3 - VLAN 103, for ADSL line 3 |
|||
*Port 4 - VLAN 104, for ADSL line 4 |
|||
*Port 8 is for the FireBrick |
|||
===Accessing the switch==== |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 101, then Click Next |
|||
***Drag Port01 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so: |
|||
**From the front page, Click VLAN |
|||
**Create a new VLAN, enter in 102, then Click Next |
|||
***Drag Port02 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 103, then Click Next |
|||
***Drag Port03 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
*Click VLAN |
|||
**Create a new VLAN, enter in 104, then Click Next |
|||
***Drag Port04 to the Untagged area |
|||
***Drag Port08 to the tagged area |
|||
***Click Next, then click Finish |
|||
Optionally, if you wish, you can name the switch: |
|||
*From the front page, click the settings/Cog icon on the left |
|||
**Click System, then Information |
|||
**Enter in Name, Location, Contact details as you wish |
|||
**Click Apply |
|||
Optionally, If you wish, you can set Names for your VLANs: |
|||
*From the front page, click the settings/Cog icon on the left |
|||
*Click VLAN, then VLAN |
|||
**Click the modify icon to the right of VLAN 101 |
|||
**Change the name from VLAN0101 to, say, PPP101 |
|||
**Click Apply |
|||
*Repeat for the other VLANs |
|||
Optionally, if you wish, you can name the Ethernet ports |
|||
*From the front page, click the settings/Cog icon on the left |
|||
*Click Port, then Port |
|||
**Tick the bot next to Port 1, Click Edit |
|||
**Set the name to, say, Modem1 |
|||
*Reat the above for ports 2, 3, and 4. For port 8, name that FireBrick. |
|||