ZyXEL GS1900-8

Overview

The GS1900-8 is a fanless 8 port managed switch.

Configuration

Factory Default Admin Username/Password

Note: If AAISP configured the switch then the credentials will be different

Default/Factory Password
IP:	192.168.1.1
Username:	admin
Password:	1234

https is enabled by default, albeit with a certificate that will give browser warnings

When you make a change to the configuration you must click Save from the top/right corner of the web interface

Factory Reset

Hold in the reset button on the front for 10 seconds, release, and all the port lights will light up and the switch will reboot.

Accessing the switch

• Set your computer to be on an IP in the subnet that the switch is in, eg, 192.168.1.100/255.255.255.0
• In your browser, go to http://192.168.1.1
• Login with the default credentials as above

VLAN config

When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions.

We'll configure the switch as:

• Port 1 - VLAN 101, for ADSL line 1
• Port 2 - VLAN 102, for ADSL line 2
• Port 3 - VLAN 103, for ADSL line 3
• Port 4 - VLAN 104, for ADSL line 4
• Port 8 is for the FireBrick

Creating the VLANs

• Click VLAN
  • Create a new VLAN, enter in 101, then Click Next
    • Drag Port01 to the Untagged area
    • Drag Port08 to the tagged area
    • Click Next, then click Finish
• Click Save from the top/right corner of the web interface

This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:

• From the front page, Click VLAN
  • Create a new VLAN, enter in 102, then Click Next
    • Drag Port02 to the Untagged area
    • Drag Port08 to the tagged area
    • Click Next, then click Finish
• Click Save from the top/right corner of the web interface

• From the front page, Click VLAN
  • Create a new VLAN, enter in 103, then Click Next
    • Drag Port03 to the Untagged area
    • Drag Port08 to the tagged area
    • Click Next, then click Finish
• Click Save from the top/right corner of the web interface

• From the front page, Click VLAN
  • Create a new VLAN, enter in 104, then Click Next
    • Drag Port04 to the Untagged area
    • Drag Port08 to the tagged area
    • Click Next, then click Finish
• Click Save from the top/right corner of the web interface

Change admin password

• From the front page, click the settings/Cog icon on the left
• Click Management, then Users
  • Click the Modify icon next to the admin user
  • Enter in your new password and click Apply.
• Click Save from the top/right corner of the web interface

Further, Optional settings

Optionally, if you wish, you can name the switch:

• From the front page, click the settings/Cog icon on the left
  • Click System, then Information
  • Enter in Name, Location, Contact details as you wish
  • Click Apply
• Click Save from the top/right corner of the web interface

Optionally, If you wish, you can set Names for your VLANs:

• From the front page, click the settings/Cog icon on the left
• Click VLAN, then VLAN
  • Click the modify icon to the right of VLAN 101
  • Change the name from VLAN0101 to, say, PPP101
  • Click Apply
• Repeat for the other VLANs
• Click Save from the top/right corner of the web interface

Optionally, if you wish, you can name the Ethernet ports

• From the front page, click the settings/Cog icon on the left
• Click Port, then Port
  • Tick the bot next to Port 1, Click Edit
  • Set the name to, say, Modem1
• Repat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
• Click Save from the top/right corner of the web interface