FireBrick SIP Configuration: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
!!Add a carrier This is the SIP account that you're connecting to: |
!!Add a carrier This is the SIP account that you're connecting to: |
||
{| |
{| border="1" cellpadding="1" cellspacing="1" |
||
|- |
|- |
||
| name |
| name |
||
| Line 24: | Line 24: | ||
|- |
|- |
||
| registrar |
| registrar |
||
| SIP Registrar server: |
| SIP Registrar server: registrar.aasip.co.uk |
||
|- |
|- |
||
| proxy |
| proxy |
||
| SIP Proxy server, |
| SIP Proxy server, proxy.aasip.co.uk |
||
|- |
|- |
||
| extn |
| extn |
||
| Internal extension number, 100 |
| Internal extension number, 100 |
||
|- |
|- |
||
| allow |
| allow |
||
| Line 38: | Line 38: | ||
| Name shown on phones, Office} |
| Name shown on phones, Office} |
||
|} |
|} |
||
Click Save. |
|||
then if you go to Status - VoIP, you should see the Carrier listed with an expiry - this shows that the FireBrick is registered to the server |
|||
Next create some users: |
|||
Config - Edit - Setup - Edit VoIP config |
|||
These will be your local SIP user accounts that your telephones use to register against the FireBrick with. |
|||
Add new VoIP user: |
|||
{| border="1" cellpadding="1" cellspacing="1" |
|||
|- |
|||
| name |
|||
| John |
|||
|- |
|||
| display-name |
|||
| John |
|||
|- |
|||
| username |
|||
| john |
|||
|- |
|||
| password |
|||
| ******* |
|||
|- |
|||
| allow |
|||
| IPs that are allowed to register, put in your LAN ip addresses, eg, x.x.x.x/27 |
|||
|- |
|||
| ddi |
|||
| The full number for this user, ie same as the carrier's number assigned to you. |
|||
|- |
|||
| extn |
|||
| John's internal extension number, eg 101 |
|||
|- |
|||
| carrier |
|||
| Pick AASIP, this will be the carrier John uses to dial out on |
|||
|- |
|||
| max-calls |
|||
| 1, if you just want to make 1 call at a time with this account |
|||
|} |
|||
Click save |
|||
Revision as of 13:23, 10 October 2012
Also see: FireBrick VoIP Page which has more details about the feature.
Taking an example of a single SIP account with AAISP, and a couple of SIP phones, a FireBrick can be configured as follows:
Go to Config - Edit - Setup - Edit VoIP config.
!!Add a carrier This is the SIP account that you're connecting to:
| name | AASIP |
| Comment | Main Office Number |
| username |
SIP account name (Phone number) |
| password | SIP account password |
| registrar | SIP Registrar server: registrar.aasip.co.uk |
| proxy | SIP Proxy server, proxy.aasip.co.uk |
| extn | Internal extension number, 100 |
| allow | IPs that are allowed to talk SIP to us (ie providers IPs), 81.187.30.110-119 |
| display-name | Name shown on phones, Office} |
Click Save. then if you go to Status - VoIP, you should see the Carrier listed with an expiry - this shows that the FireBrick is registered to the server
Next create some users: Config - Edit - Setup - Edit VoIP config These will be your local SIP user accounts that your telephones use to register against the FireBrick with. Add new VoIP user:
| name | John |
| display-name | John |
| username | john |
| password | ******* |
| allow | IPs that are allowed to register, put in your LAN ip addresses, eg, x.x.x.x/27 |
| ddi | The full number for this user, ie same as the carrier's number assigned to you. |
| extn | John's internal extension number, eg 101 |
| carrier | Pick AASIP, this will be the carrier John uses to dial out on |
| max-calls | 1, if you just want to make 1 call at a time with this account |
Click save