Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

User:TomJepp/RouterOS L2TP: Difference between revisions

← Older editNewer edit →
Content deleted Content added
TomJepp (talk | contribs)
96 edits
No edit summary
TomJepp (talk | contribs)
96 edits
mNo edit summary
Line 20: Line 20:
# Read the whole guide before you start.
# Read the whole guide before you start.
# Make sure your router is running reasonably up to date RouterOS.
# Make sure your router is running reasonably up to date RouterOS.
# Make sure you know your account details provided by A&A for the L2TP connection.
⚫
# This guide assumes that ether1 is connected to your existing internet connection, and that DHCP will be used to get an IP address. Devices will be connected to ether2, ether3, ether4 and ether5, which we will bridge together. The PC being used for configuration should be connected to one of these four ports.
# Make sure you know your account details provided by A&A for the L2TP connection. Check what IP addresses you've been assigned too. This guide will assume you have 1x IPv4 assigned (198.51.100.127) and a /48 IPv6 block (2001:8b0:db8::/48).
# Check what IP addresses you've been assigned. This guide will assume you have 1x IPv4 assigned (198.51.100.127) and a /48 IPv6 block (2001:8b0:db8::/48).
⚫
# Make sure you're starting with a freshly factory reset router without any default configuration.
⚫
# Make sure you know what IP address ranges your existing network uses - you will need to pick an IPv4 subnet that does not overlap. This guide will assume the typical Mikrotik default of 192.168.88.0/24.
⚫
# This guide assumes you start from a freshly factory reset router without any default configuration.
# This guide will use WinBox to set up your router. You can grab the latest version from https://mikrotik.com/download and this guide was written & tested with v3.41. A config export is provided at the end for advanced users.
# This guide will use WinBox to set up your router. You can grab the latest version from https://mikrotik.com/download and this guide was written & tested with v3.41. A config export is provided at the end for advanced users.
# ether1 should be connected to your existing internet connection, and that DHCP will be used to get an IP address.
⚫
# Devices will be connected to ether2, ether3, ether4 and ether5, which we will bridge together. The PC being used for configuration should be connected to one of these four ports.
⚫
# Make sure you know what IP address ranges your existing network uses - you will need to pick an IPv4 subnet that does not overlap. This guide will assume the typical Mikrotik default of 192.168.88.0/24.


== Getting started ==
== Getting started ==
Retrieved from "http://support.aa.net.uk/User:TomJepp/RouterOS_L2TP"