FreeBSD IPv6 Tunnel Config: Difference between revisions

Revision as of 11:59, 25 November 2010

In /etc/rc.conf:

ipv6_enable="YES"
ipv6_gateway_enable="YES"
ipv6_defaultrouter="-interface gif0"
ipv6_default_interface="gif0"
gif_interfaces="gif0"
gifconfig_gif0="A.B.C.D 81.187.81.6"
# substitute the IPv4 address of your machine for A.B.C.D
ipv6_ifconfig_gif0="2001:08b0:XXXX:1::1 prefixlen 64"
# 2001:08b0:XXXX should be replaced by your /48 allocation
# in this case I have used IP 1 on subnet 1 as the IPv6
# address - you can (and probably should) adjust as desired.

Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).

Revision as of 11:49, 25 November 2010 (view source) Tdgsandf (talk \| contribs) (Created page with "In /etc/rc.conf: <pre> ipv6_enable="YES" ipv6_gateway_enable="YES" ipv6_defaultrouter="-interface gif0" ipv6_default_interface="gif0" gif_interfaces="gif0" gifconfig_gif0="A.B.C....")		Revision as of 11:59, 25 November 2010 (view source) Tdgsandf (talk \| contribs) No edit summary Newer edit →
Line 15:		Line 15:

	Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).		Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).

			[[Category:IPv6]] [[Category:FreeBSD]] [[Category:Configuring]]