Revision as of 17:44, 8 December 2010

Related Pages on the A&A Website:

The following equipment has been successfully used as an IPv6 Router for home use

Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

@@ Line 1: / Line 1: @@
-=Related Pages on the A&A Website:=
+= Related Pages on the A&amp;A Website:  =
 *[http://www.aaisp.net.uk/kb-broadband-ipv6.html www.aaisp.net.uk/kb-broadband-ipv6.html]
-== IPv6 over IP Tunnelled Connections ==
+== Useful Blog/HOWTO Entries  ==
-* [[Cisco IPv6 Tunnel Config]]
-* [[FreeBSD IPv6 Tunnel Config]]
+*[http://www.pitt-pladdy.com/blog/_20100123-184109%2B0000%20OpenWrt%20with%20native%20IPv6%20on%20DG834%20v2%20%28using%20AAISP%29/ Using OpenWRT as an IPv6 router]
-See also the configuration examples on the IPv6 Knowledge-base page referenced above.
+*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]
+== Consumer CPE Equipment  ==
+The following equipment has been successfully used as an IPv6 Router for home use
+*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
+*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
+== IPv6 over IP Tunnelled Connections  ==
+*[[Cisco IPv6 Tunnel Config]]
+*[[FreeBSD IPv6 Tunnel Config]]
+See also the configuration examples on the IPv6 Knowledge-base page referenced above.
 [[Category:IPv6]] [[Category:Configuring]]