Revision as of 14:14, 4 Haziran 2013

Related Pages on the A&A Website:

These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a BE line. (more info in your Information PDF Pack (available from sales if required).

Basic BT Settings

These are the same settings as a TalkTalk line and Be PPPoA line (Installed after Dec 2010)

BT-Zyxel.png

Username (as given, eg xx@a.1)
Password (as given, can be changed on the Control Pages)
VPI = 0
VCI = 38
MTU = 1500
PPPoA
Mux = VC Mux
Line Type = Auto
WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on www.aaisp.net.uk/kb-broadband-router.html

Basic BE PPPoE Settings

This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.

BE-Zyxel.png

Username (as given, eg yy@a.1)
Password (as given, can be changed on the Control Pages)
VPI = 0
VCI = 101
MTU = 1492
PPPoE
Mux = LLC
Line Type = Auto
WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on www.aaisp.net.uk/kb-broadband-bebt.html

@@ Line 6: / Line 6: @@
 = Basic BT Settings  =
-These are the same settings as a Be PPPoA line (Installed after Dec 2010)
+These are the same settings as a TalkTalk line and Be PPPoA line (Installed after Dec 2010)
 [[Image:BT-Zyxel.png|thumb|150px|BT-Zyxel.png]]
 *Username (as given, eg xx@a.1)