IPv6 Configuration: Difference between revisions
| Line 14: | Line 14: | ||
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem |
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem |
||
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze) |
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze) |
||
*Our [[FireBrick 2700]] page has info on Native IPv6 config |
*Our [[FireBrick 2700]] page has info on Native IPv6 config (also applies to 2500) |
||
== IPv6 over IP Tunnelled Connections == |
== IPv6 over IP Tunnelled Connections == |
||
Revision as of 10:54, 10 Ocak 2011
Related Pages on the A&A Website:
Useful Blog/HOWTO Entries
Consumer CPE Equipment
The following equipment has been successfully used as an IPv6 Router for home use
- Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
- Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
- Our FireBrick 2700 page has info on Native IPv6 config (also applies to 2500)
IPv6 over IP Tunnelled Connections
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
FireBrick 2500/2700
It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:
- An IPv6 address on the LAN subnet
- ra="true" in the subnet