Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

IPv6 Configuration: Difference between revisions

Content deleted Content added
42jon (talk | contribs)
Gerdesj (talk | contribs)
Changed the subject to be more consumer friendly and added a search for hardware discussion page
Line 8: Line 8:
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]


== Consumer CPE Equipment ==
== IPv6 ready hardware ==


The following equipment has been successfully used as an IPv6 Router for home use
The following equipment has been successfully used as an IPv6 Router for home use. These are known as CPE or Customer Premises Equipment.


*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
Line 16: Line 16:
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
*Our [[FireBrick 2700]] page has info on Native IPv6 config (also applies to 2500)
*Our [[FireBrick 2700]] page has info on Native IPv6 config (also applies to 2500)

The search for additional IPv6 CPE possibilities: [[IPv6CPESearch]]


== IPv6 over IP Tunnelled Connections ==
== IPv6 over IP Tunnelled Connections ==