VoIP Phones - SNOM 3xx

Snom 3xx Range

Snom have a range of phones in their '3' series, the 300, 320, 360 and 370.

Phones and Versions Tested

SNOM 3xx Versions tested
Model	Version	Notes
320
360	8.7.3.19
360	8.2.35
370	8.4.35
370	8.7.3.19
370	8.7.4.7a

Feature Notes
Supports 302 Redirect	Yes
Tested on FireBrick SIP Server	Yes
IPv6 Support	No

Configuration:

Apart from the 'Identity' settings, no additional configuration is required.

SNOM 3xx Identity Settings
Setting	Value
Identity active	on
Account	Your Number +44
Registrar	voiceless.aa.net.uk
Outbound Proxy	Leave Empty
Authentication Name	Your Number +44
Password	Your Password
Prioritise PBX number lookup	off (see Notes below)
Other Settings	As default

Notes

• Snom did make available IPv6 firmware, but this was buggy and no longer available, and Snom say that IPv6 will not be supported on the 3xx range.
• Directory Name not being shown? A couple of times we've noticed that the Directory does not display the Name when that number calls in. Try turning off 'prioritise pbx number lookup' - This setting is found on the Snom web pages under Advanced - Behaviour. This setting means the phone will use the Name in the Directory rather than the Name given in the SIP messages when the call is sent to the phone.

Firewall & Security

• You will also want to set up firewall rules, as per the VoIP Firewall page.
• Also see the VoIP Security page for information about securing your VoIP service.