Router - Cisco 887VA-Native-IPv6

From: http://blog.gamermatrix.co.uk/?p=333

...first of all, in order to get the Cisco up and running with IPv6, ensure you have a /64 assigned in AAISP’s control pages to your line. Then run the following commands on your Cisco:

ipv6 source-route
ipv6 unicast-routing
ipv6 cef
ipv6 multicast-routing

conf t

int dialerX
ipv6 enable
ipv6 dhcp client pd myprefix rapid-commit

int vlan1
ipv6 address 2001:xxx:xxxx:xxxx::1/64

At this point, you should be able to ping google.com and have it successfully resolve to an IPv6 address (provided your DNS is serving it) and receive a response.

The next step is to assign another IPv6 /64 range for your ‘internal’ computers. I have assigned multiple /64’s as I have multiple VLAN’s all with a different purpose, but one should be enough for most people. If like me you have a firewall sat behind the Cisco with it’s own external address then you’ll want to assign it an IPv6 address out of the /64 subnet you’re using in ‘vlan1′ as defined on your Cisco. For example, you’d assign 2001:xxx:xxxx:xxxx::2/64 to your firewall.

In order to route another /64 range through to your internal hosts you’ll need to configure this on your internal LAN interface on your firewall then add a static route on the Cisco to tell it how to route it. Remember, in order to get to the /64 range in question your router needs to know where to send the packets.

ipv6 route 2002:xxx:xxxx:xxxx::1/64 2001:xxx:xxxx:xxxx::2

The above command basically says ‘route 2002:xxx:xxxx:xxxx::1/64 via 2001:xxx:xxxx:xxxx::2′ which is resident on our external interface on our firewall.

I may expand on this but it really is this simple, if you have any questions please feel free to comment on http://blog.gamermatrix.co.uk/?p=333