Debian IPv6 Tunnel Config: Difference between revisions
(Created page with "'''Draft in progress ..... ''' Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end: auto 6in4 iface 6...") |
No edit summary |
||
| Line 16: | Line 16: | ||
After that just type "ifup 6in4" (as root) and your link should be up. |
After that just type "ifup 6in4" (as root) and your link should be up. |
||
This could be it !! : |
|||
auto 6in4 |
|||
iface 6in4 inet6 v4tunnel |
|||
address 2001:8b0:7:feed::1 |
|||
local <ppp0 IPv4 IP> |
|||
endpoint 81.187.81.6 |
|||
ttl 64 |
|||
Revision as of 14:30, 16 February 2011
Draft in progress .....
Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:
auto 6in4
iface 6in4 inet6 v4tunnel
address 2001:08B0:XXXX:0001::1
netmask 124
endpoint 81.187.81.6
ttl 64
up ip link set mtu 1280 dev 6in4
up ip route add default via 2001:08B0:XXXX:0001::2 dev 6in4
remembering to change the XXXX to whatever value you've been allocated.
After that just type "ifup 6in4" (as root) and your link should be up.
This could be it !! :
auto 6in4 iface 6in4 inet6 v4tunnel address 2001:8b0:7:feed::1 local <ppp0 IPv4 IP> endpoint 81.187.81.6 ttl 64