Router - Comtrend: Difference between revisions

← Older edit Newer edit →

Content deleted Content added

Inline

@@ Line 1: / Line 1: @@
 =How to setup Comtrend:=
-#Plug in router.
+*Plug in router.
-#Go to 192.168.1.1
+*Go to 192.168.1.1
 <pre>	Username: root
 	Password: 12345
@@ Line 9: / Line 9: @@
 ==For BT:==
-#Advanced -> Layer2 -> ATM -> Add
+*Advanced -> Layer2 -> ATM -> Add
 <pre>	VPI/VCI : 0/38
 	Path0
@@ Line 19: / Line 19: @@
 </pre>
-) Advanced -> WAN -> Add
+*Advanced -> WAN -> Add
-	a) Select Layer2 interface
+**	a) Select Layer2 interface
-	   Next
+***	   Next
-	b) PPPoE
+**	b) PPPoE
-	   Description : BT
+***	   Description : BT
-	   Tick Enable IPv6
+***	   Tick Enable IPv6
-	   Next
+***	   Next
-	c) enter username, eg x@a.1
+**	c) enter username, eg x@a.1
-	   enter password
+***	   enter password
-	   leave service name blank
+***	   leave service name blank
-	   enable Firewall
+***	   enable Firewall
-	   Enable NAT if no public IPv4 (or preferably get public IPv4)
+***	   Enable NAT if no public IPv4 (or preferably get public IPv4)
-	   next
+***	   next
-	d) Obtain DNS from WAN
+**	d) Obtain DNS from WAN
-	   next
+***	   next
-	e) Save
+**	e) Save
-) Reboot router
+*Reboot router
-) Setup LAN and Wireless how you would like.
+*Setup LAN, firewall and Wireless how you would like.
 ==For BE:==
-) Advanced -> Layer2 -> ATM -> Add
+*Advanced -> Layer2 -> ATM -> Add
-	a) VPI/VCI : 0/101
+**	a) VPI/VCI : 0/101
-	   Path0
+***	   Path0
-	   EoA
+***	   EoA
-	   Default Mode
+***	   Default Mode
-	   Encapsulation : LLC
+***	   Encapsulation : LLC
-           Service Category : UBR Without PCR
+***           Service Category : UBR Without PCR
-	   Strict Priority
+***	   Strict Priority
-) Advanced -> WAN -> Add
+*Advanced -> WAN -> Add
-	a) Select Layer2 interface
+**	a) Select Layer2 interface
-	   Next
+***	   Next
-	b) PPPoE
+**	b) PPPoE
-	   Description : BE
+***	   Description : BE
-	   Tick Enable IPv6
+***	   Tick Enable IPv6
-	   Next
+***	   Next
-	c) enter username, eg x@a.1
+**	c) enter username, eg x@a.1
-	   enter password
+***	   enter password
-	   leave service name blank
+***	   leave service name blank
-	   enable Firewall
+***	   enable Firewall
-	   Enable NAT if no public IPv4 (or preferably get public IPv4)
+***	   Enable NAT if no public IPv4 (or preferably get public IPv4)
-	   next
+***	   next
-	d) Obtain DNS from WAN
+**	d) Obtain DNS from WAN
-	   next
+***	   next
-	e) Save
+**	e) Save
-) Reboot router
+*Reboot router
-) Setup LAN and Wireless how you would like.
+*Setup LAN and Wireless how you would like.