FTTC Modem: Difference between revisions
(Added Router throughput section) |
|||
| Line 40: | Line 40: | ||
|style="color:green"|24Mb |
|style="color:green"|24Mb |
||
|Running OpenWRT 10.03 (Backfire). Probably capable of more - have asked BT to move cabinet closer, but they seem unwilling! |
|Running OpenWRT 10.03 (Backfire). Probably capable of more - have asked BT to move cabinet closer, but they seem unwilling! |
||
|- |
|||
|FireBrick 2700 |
|||
|16Mb |
|||
|style="color:green"|16Mb |
|||
|It should be able to handle around 350Mb/s! |
|||
|} |
|} |
||
Revision as of 15:38, 5 Mayıs 2011
Related Pages on the A&A Website:
With FTTC, BT will supply and install a VDSL modem (the Active NTE in BT speak), You will then need a PPPoE device (router or software) to use the service.
- PPPoE Service Name = Blank
- PPPoE username = as supplied, eg x@a.1
- PPPoE password = as supplied
- MTU = 1500 (if your equipment can handle baby jumbo frames and RFC 4638), otherwise 1492
- Auth Protocol CHAP
FTTC Modem
Here is an image of a BT supplied FTTC modem
The modem is supplied by BT, if it develops a fault then AAISP can contact BT and report a fault.
If the sync light flashes, then there is no sync, and will probably need to be reported as a fault.
Router Throughput
With the switch to FTTC (especially from low sync'd ADSL connections) your modem is suddenly confronted with throughput possibly 10 or even 20 times more than before!
| Router | Sync Speed | Throughput | Notes |
| Linksys WRTU54G-TM | 24Mb | ~18Mb/sec | Running OpenWRT trunk from here. Disconnected PPP due to link saturation at default settings - adjust PPP options for stability |
| Netgear WNR854T | 24Mb | 24Mb | Running OpenWRT 10.03 (Backfire). Probably capable of more - have asked BT to move cabinet closer, but they seem unwilling! |
| FireBrick 2700 | 16Mb | 16Mb | It should be able to handle around 350Mb/s! |
Notes:
- Green throughput - not bottleneck on connection
- Red throughput - bottleneck on connection
Billion 7800 Notes
The Billion 7800 is a popular router with our customers, but take note that when configuring the WAN side, it may need a reboot when changing the WAN type (ADSL/eWAN), and then a reboot when changing the WAN Profile.
FireBrick 2700
The Firebrick 2700 is a great router for FTTC, and even bonding FTTC. See the FireBrick pages for more info