VMG1312-B10A: Static Routes: Difference between revisions
(Created page with "Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router. T...") |
mNo edit summary |
||
| Line 9: | Line 9: | ||
[[File:VMG-static.png|frame|none|Statc Route example]] |
[[File:VMG-static.png|frame|none|Statc Route example]] |
||
==CLI== |
|||
[[Category:ZyXEL_VMG1312|Firewall]] |
|||
From the CLI (telnet/SSH) you can view the route table with: |
|||
show list |
|||
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem. |
|||
Revision as of 16:55, 15 Haziran 2015
Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.
The static route can be added via the web interface:
Network Setting -> Routing -> Add new static route
Here is an example:
Statc Route example
CLI
From the CLI (telnet/SSH) you can view the route table with:
show list
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.