IPsec ZyXEL USG40: Difference between revisions
Content deleted Content added
adding more changes |
No edit summary |
||
| Line 34: | Line 34: | ||
Now, click "OK" and activate the config by clicking on the entry that you have just created and pressing the "Activate" button. |
Now, click "OK" and activate the config by clicking on the entry that you have just created and pressing the "Activate" button. |
||
<br> |
|||
Next, we're going to select the "VPN Connection" Tab and click "Add". |
|||
* Click show "Advanced settings" |
|||
* Select "Nailed-Up" and "Enable Replay Detection". |
|||
* Under "VPN Gateway" select "Remote Access (Client Role) and select the VPN Gateway you just created in the drop down box. |
|||
* in "Local Policy" select "DMZ_SUBNET" and in "Remote Policy" select "LAN1_SUBNET". |
|||
* Under "Phase 2 Setting", change the "SA Life Time" to "3000000". |
|||
* Keep the defaults fror "Active Protocol" & "Encapsulation". |
|||
* In the "Proposal" section, change "Encryption" to "3DES" and the "Authentication" to "SHA1". |
|||
* We then need to change the "Perfect Forward Secrecy (PFS)" to "DH2". |
|||
* Now all we need to do is click "OK" and "Activate". |
|||
<br> |
|||
Once all of this has been done, press "Connect" and you should see that you now have an active IPsec connection from your ZyWALL USG40 to your FireBrick. |
|||