FireBrick 2700 Replace PSU

Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it...

1. Remove all the screw from the top of the case

   

2. Remove the lid

   

3. Flip the firebrick over and remove both the screws from the front of the case
4. Remove the front fascia
5. Unplug the green power cable from the PCB
6. Remove the old PSU
7. Put the new PSU in it's position
8. Connect the green power cable from the new PSU to the PCB
9. Put the front fascia back in place and screw it in
10. Put the top cover back on and replace all the screws