Windows iperf3

From AAISP Support Site
Revision as of 12:21, 12 Haziran 2023 by AA-Andrew (talk | contribs)


1)

Download iperf-3.13-windows-x64.zip and save it to your computer, eg in your Downloads folder.

  • Saved to Downloads folder

    Saved to Downloads folder

2)

Right click on it, and select Extract all.

  • Extract

    Extract

3)

Open up the Command Prompt - Click Start then type cmd and click on it.

4)

In the black box type: cd Downloads\iperf-3.13-windows-x64

  • Windows iperf 3 cmd cd.JPG

5)

Run an speed test by typing: iperf3.exe -c speedtest.aa.net.uk (you may need to click 'allow access' if a Windows Defender window pops up

  • Results

    Results

By default, this will run a single-thread upload speedtest (sending traffic TO the speed test server).

Variations

There are variations you can do to test the speed as follows:

  • Run a single-thread Download test: iperf3.exe -R -P1 -c speedtest.aa.net.uk
  • Run a single-thread Upload test: iperf3.exe -P1 -c speedtest.aa.net.uk
  • Run a 10-thread Download test: iperf3.exe -R -P10 -c speedtest.aa.net.uk
  • Run a 10-thread Upload test: iperf3.exe -P10 -c speedtest.aa.net.uk
Retrieved from ‘http://support.aa.net.uk/index.php?title=Windows_iperf3&oldid=16529’