Traffic Capture
Availability
Traffic capture is available on all our ADSL and FTTC lines.
Information
This will perform a traffic capture of your line (or lines if you have more than one). You can then view the capture on the page or download a pcap file which can be viewed with other software - e.g. Wireshark.
Example
Here is a simple example, which actually only shows a few ICMP pings.
The Fields are:
- Timestamp
- Direction (Tx/Rx)
- Length/size of the packet
- Session ID
- Protocol, eg IP, IPv6 etc
- Length/Size of the payload
- Source IP Address and port
- Destination IP Address and port
- Packet type, eg ICMP echo reply
You will see our LCP echos every second, these are used to monitor the line and are used to create our CQM Graphs, they looks like this:
14:54:32.577431 Rx length 30: [ses 0x3776] LCP (0xc021), length 10: LCP, [|LCP]
The pcap file can be downloaded and opened in a viewer program such as Wireshark, this makes viewing and analyzing the traffic easier.
Access
Access is via the control pages.