FreeBSD IPv6 Tunnel Config

From AAISP Support Site
Revision as of 11:49, 25 November 2010 by Tdgsandf (talk | contribs) (Created page with "In /etc/rc.conf: <pre> ipv6_enable="YES" ipv6_gateway_enable="YES" ipv6_defaultrouter="-interface gif0" ipv6_default_interface="gif0" gif_interfaces="gif0" gifconfig_gif0="A.B.C....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

In /etc/rc.conf: 

ipv6_enable="YES"
ipv6_gateway_enable="YES"
ipv6_defaultrouter="-interface gif0"
ipv6_default_interface="gif0"
gif_interfaces="gif0"
gifconfig_gif0="A.B.C.D 81.187.81.6"
# substitute the IPv4 address of your machine for A.B.C.D
ipv6_ifconfig_gif0="2001:08b0:XXXX:1::1 prefixlen 64"
# 2001:08b0:XXXX should be replaced by your /48 allocation
# in this case I have used IP 1 on subnet 1 as the IPv6
# address - you can (and probably should) adjust as desired.

Don't forget to configure an IPv6 firewall (this is left as an exercise for the reader).

Retrieved from ‘http://support.aa.net.uk/index.php?title=FreeBSD_IPv6_Tunnel_Config&oldid=194’