IPv6 Configuration

Related Pages on the A&A Website:

• www.aaisp.net.uk/kb-broadband-ipv6.html

Useful Blog/HOWTO Entries

• Using OpenWRT as an IPv6 router
• Configuring OpenWRT for IPv6

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

• Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
• Linksys NSLU2 running Debian Lenny with a SpeedTouch USB ADSL modem
• Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
• Our FireBrick 2700 page has info on Native IPv6 config (also applies to 2500)

IPv6 over IP Tunnelled Connections

• Cisco IPv6 Tunnel Config
• FreeBSD IPv6 Tunnel Config
• FireBrick 2700 v6 Tunnel

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:

• An IPv6 address on the LAN subnet
• ra="true" in the subnet