Snom 3xx Range
Snom have a range of phones in their '3' series, the 300, 320, 360 and 370.
Phones and Versions Tested
| SNOM 3xx Versions tested
|
| Model
|
Version
|
Notes
|
| 320
|
|
|
| 360
|
8.7.3.19
|
|
| 360
|
8.2.35
|
|
| 370
|
8.4.35
|
|
| 370
|
8.7.3.19
|
|
| 370
|
8.7.4.7a
|
|
Configuration:
Apart from the 'Identity' settings, no additional configuration is required.
| SNOM 3xx Identity Settings
|
| Setting
|
Value
|
| Identity active
|
on
|
| Account
|
Your Number +44
|
| Registrar
|
voiceless.aa.net.uk
|
| Outbound Proxy
|
Leave Empty
|
| Authentication Name
|
Your Number +44
|
| Password
|
Your Password
|
| Prioritise PBX number lookup
|
off (see Notes below)
|
| Other Settings
|
As default
|
Notes
- Snom did make available IPv6 firmware, but this was buggy and no longer available, and Snom say that IPv6 will not be supported on the 3xx range.
- Directory Name not being shown? A couple of times we've noticed that the Directory does not display the Name when that number calls in. Try turning off 'prioritise pbx number lookup' - This setting is found on the Snom web pages under Advanced - Behaviour. This setting means the phone will use the Name in the Directory rather than the Name given in the SIP messages when the call is sent to the phone.
Firewall & Security
- You will also want to set up firewall rules, as per the VoIP Firewall page.
- Also see the VoIP Security page for information about securing your VoIP service.
Snom have a range of phones in their '3' series, the 300, 320, 360 and 370.