How to setup Comtrend:

1) Plug in router. 2) Go to 192.168.1.1 Username: root Password: 12345

For BT:

3) Advanced -> Layer2 -> ATM -> Add VPI/VCI : 0/38 Path0 EoA Default Mode Encapsulation : LLC

       Service Category : UBR Without PCR

Strict Priority

4) Advanced -> WAN -> Add a) Select Layer2 interface Next b) PPPoE Description : BT Tick Enable IPv6 Next c) enter username, eg x@a.1 enter password leave service name blank enable Firewall Enable NAT if no public IPv4 (or preferably get public IPv4) next d) Obtain DNS from WAN next e) Save

5) Reboot router

6) Setup LAN and Wireless how you would like.

For BE:

3) Advanced -> Layer2 -> ATM -> Add a) VPI/VCI : 0/101 Path0 EoA Default Mode Encapsulation : LLC

          Service Category : UBR Without PCR

Strict Priority

4) Advanced -> WAN -> Add a) Select Layer2 interface Next b) PPPoE Description : BE Tick Enable IPv6 Next c) enter username, eg x@a.1 enter password leave service name blank enable Firewall Enable NAT if no public IPv4 (or preferably get public IPv4) next d) Obtain DNS from WAN next e) Save

5) Reboot router

6) Setup LAN and Wireless how you would like.