VMG1312-B10A: AAISP Configuration
AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.
Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.
Here is an overview of the settings that are modified from the default:
Configure WAN interface || (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) || 2015-02-01- Configure PPP settings as per the service || || 2015-02-01
- Configure DHCP || (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) || 2015-02-01
- Configure LAN subnet if line has a block of public IPs. || (else default is 192.168.1.1) || 2015-02-01
- Configure WiFi || (Further Settings on Control Pages: SSID, Password or disable WiFi) || 2015-02-01
- Configure WiFi for 20Mhz instead of the 40Mhz default || (see VMG1312: WiFi Tips) || 2015-02-01
- Configure WiFi for AES only (not legacy TKIP)|| || 2015-06-16
- Configure Firewall on/off || (Settings on Control Pages, Default=Enabled) || 2015-02-01
- Configure TR-069 so the router can be managed by AAISP || (we give customer the same controls as staff get) || 2015-02-01
- Configure Local logging (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. (added 2015-05-29)
- To view log: WebUI: System Monitor - Log or via telnet/ssh CLI: syslog dump system.
- Add a Firewall rule to allow ICMPv6 || ||2015-06-16
- Disable NAT, if customer has a public IP block || || 2015-02-01
- Disable SNMP || || 2015-02-01
- Disable 3G backup || || 2015-02-01
- Disable 'DoS Protection Blocking' || as it does odd things, like blocking WebUI over WiFi || 2015-06-16
- Change NTP servers || to be time.aa.net.uk and 0.uk.pool.ntp.org || 2015-02-01
- Change 'supervisor' password || (Setting on Control Pages) || 2015-02-01
- Change 'admin' password || (Setting on Control Pages) || 2015-02-01
- Change Remote Management Options || (Further Settings on Control Pages) || 2015-02-01
- Change QoS || to give upstream priority based on 'Packet Length' (See: VMG1312: QoS) || 2015-02-01
- Change 'Deny Ping Response' to Disable, || to allow the router to reply to ping. || 2015-02-01
- Disable the default QoS Classes || (See: VMG1312: QoS) || 2015-02-01
- Remove the default read-only zyuser user || || 2015-02-01
| Setting | Note | Date added |
|---|
- Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.