Overview

Although we've seen problems with some Vigor routers in the past (ie 2600 having problems with ADSL2), some customers do use them and were interested in how they work with the AAISP 3G Data sims for fallback. We configured one, and here is details on the config (pretty straight forward) and how it worked falling back to 3G.

Configuration

Here are screenshots of the various WAN settings page, with fallback settings etc...

Falling Back

Vigor-2820-ADSL-connected.png

For testing this, we used an AAISP ADSL line along with an AAISP Data SIM.

Here we plugged in the 3G USB dongle, and the ADSL, and the ADSL logged in.

We then unplugged the ADSL line, and about 30 seconds later the 3G USB dongle connected and the router was back online.

When the ADSL line was plugged back in again the router gained sync and logged in, and thendisconnected the 3G Dongle.

At the moment (November 2010) The Data SIM and ADSL line had separate WAN IP addresses, and we're unable to route blocks of IPs to the Data SIM.

Vigor-2820-3G-connected.png