VMG1312-B10A: AAISP Configuration

From AAISP Support Site
Revision as of 10:57, 13 Mayıs 2015 by AA-Andrew (talk | contribs)

AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.

Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.

Here is an overview of the settings that are modified from the default:

  • Configure WAN interface (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP))
  • Configure PPP settings as per the service
  • Configure DHCP (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers)
  • Configure LAN subnet if line has a block of public IPs. (else default is 192.168.1.1)
  • Configure WiFi (Further Settings on Control Pages: SSID, Password or disable WiFi)
  • Configure Firewall on/off (Settings on Control Pages, Default=Enabled)
  • Configure TR-069
  • Disable NAT, if customer has a public IP block
  • Disable SNMP
  • Disable 3G backup
  • Change NTP servers to be time.aa.net.uk and uk.pool.ntp.org
  • Change 'supervisor' password (Setting on Control Pages)
  • Change 'admin' password (Setting on Control Pages)
  • Change Remote Management Options (Further Settings on Control Pages)
  • Change QoS to give upstream priority based on 'Packet Length'
  • Change 'Deny Ping Response' to Disable, to allow the router to reply to ping.
  • Disable the default QoS Classes
  • Remove the default read-only zyuser user

This list may not be exhaustive, and may change over time.

Retrieved from ‘http://support.aa.net.uk/index.php?title=VMG1312-B10A:_AAISP_Configuration&oldid=9257’