Router - TG582N - LEDs

From AAISP Support Site
Revision as of 00:18, 18 August 2018 by Reedy (talk | contribs) (clean up)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Got to Main TG582N Page

Technicolor LED status
TG582N LED Status
Steady Flashing Blink Off
Power Power on (red=upgrading) Power off
Ethernet LAN Connected LAN Activity No LAN connected
Broadband In Sync Attempting sync Traffic No Sync
Internet PPP up PPP down
Wi-Fi

If using the TG582n with an external modem (e.g. an Openreach modem with FTTC) then the Broadband and Internet LEDs will work better if the router is configured with

:system config WANMode=ETH WANEthPort=ethif4


Other pages regarding this router

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>